KMEA Engineering College Edathala

KMEA Engineering College, Edathala
Established Year:1957
Rank:
College Type: Engineering Colleges
University: M G University and KTU

KMEA Engineering College, Edathala

The Kerala Muslim Educational Association was established in 1955 with the lofty aim of setting up quality educational institutions on a par with global standards, promoting education among minority communities and providing financial aid to the economically weak and deserving students.The KMEA Engineering College is dedicated to the fond memory of Sri. C.H. Mohammed Koya, a dynamic visionary, an eminent educationalist and administrator.Established in 2002 by the Kerala Muslim Educational Association, KMEA Engineering College is a private self-financing college which provides quality education and unique learning experience in science and technology. The institution has grown many fold in just over 15 years and became one of the major institutions among the new generation engineering colleges in Kerala.

Founded In

: 1957

Type of College

: Engineering Colleges

Affiliated to

: M G University and KTU

Contact

Contact Person
: KMEA Engineering College, Edathala
Contact Phone
: 9562554488, 0484 2411555
city
: Edathala
state
: Kerala
country
: India

Course Detail

B Tech Civil Engineering
Computer Science and Engineering (B.Tech)
  • Course Duration
    : 4years
  • Course Mode
    : full time
  • Total Seats
    : ---
  • Course Fees
    : ---
  • Eligibility

    Candidate must have passed 10 2 examination or an equivalent qualification from a recognized Board.

Computer Science and Engineering ( Btech )
  • Course Duration
    : 4years
  • Course Mode
    : full time
  • Total Seats
    : ---
  • Course Fees
    : ---
  • Eligibility

    Candidate must have passed 10 2 examination or an equivalent qualification from a recognized Board.

Electrical and Electronics Engineering ( Btech )
  • Course Duration
    : 4years
  • Course Mode
    : full time
  • Total Seats
    : ---
  • Course Fees
    : ---
  • Eligibility

    Candidate must have passed 10 2 examination or an equivalent qualification from a recognized Board.

Electronics and Communication Engineering ( Btech )
  • Course Duration
    : 4years
  • Course Mode
    : full time
  • Total Seats
    : ---
  • Course Fees
    : ---
  • Eligibility

    Candidate must have passed 10 2 examination or an equivalent qualification from a recognized Board.

Mechanical Engineering ( Btech )
  • Course Duration
    : 4years
  • Course Mode
    : full time
  • Total Seats
    : ---
  • Course Fees
    : ---
  • Eligibility

    Candidate must have passed 10 2 examination or an equivalent qualification from a recognized Board.

Electronics and Instrumentation Engineering(B.tech)
  • Course Duration
    : 4years
  • Course Mode
    : full time
  • Total Seats
    : ---
  • Course Fees
    : ---
  • Eligibility

    Candidate must have passed 10 2 examination or an equivalent qualification from a recognized Board.

M.Tech in Computer Aided Structural Engineering
  • Course Duration
    : 2years
  • Course Mode
    : full time
  • Total Seats
    : ---
  • Course Fees
    : ---
  • Eligibility

    The candidates shall be an Indian National. The candidates should have studied the Graduate course in an institution approved by the AICTE/ Deemed Universities. Candidates should have a minimum of 60% aggregate marks in the Engineering Degree examination. For SC/ST candidates a pass in the Engineering Degree course is sufficient. Candidates who have appeared for the final semester examination can also apply, provided he/she has passed all the subjects up to and including the 6th semester exam. Admission shall normally be restricted to those with valid GATE score. However, this stipulation is relaxed in the case of sponsored candidates. In case seats remain vacant due to lack of candidates with valid GATE score, candidates from Kerala State without valid GATE score will be considered against such vacancies. Even if seats are still remaining vacant, candidates from other states will be considered for admission.

Computer Science and Engineering ( Mtech )
  • Course Duration
    : 2years
  • Course Mode
    : full time
  • Total Seats
    : ---
  • Course Fees
    : ---
  • Eligibility

    The candidates shall be an Indian National. The candidates should have studied the Graduate course in an institution approved by the AICTE/ Deemed Universities. Candidates should have a minimum of 60% aggregate marks in the Engineering Degree examination. For SC/ST candidates a pass in the Engineering Degree course is sufficient. Candidates who have appeared for the final semester examination can also apply, provided he/she has passed all the subjects up to and including the 6th semester exam. Admission shall normally be restricted to those with valid GATE score. However, this stipulation is relaxed in the case of sponsored candidates. In case seats remain vacant due to lack of candidates with valid GATE score, candidates from Kerala State without valid GATE score will be considered against such vacancies. Even if seats are still remaining vacant, candidates from other states will be considered for admission.

Power Systems and Power Electronics(M.Tech)
  • Course Duration
    : 2years
  • Course Mode
    : full time
  • Total Seats
    : ---
  • Course Fees
    : ---
  • Eligibility

    The candidates shall be an Indian National. The candidates should have studied the Graduate course in an institution approved by the AICTE/ Deemed Universities. Candidates should have a minimum of 60% aggregate marks in the Engineering Degree examination. For SC/ST candidates a pass in the Engineering Degree course is sufficient. Candidates who have appeared for the final semester examination can also apply, provided he/she has passed all the subjects up to and including the 6th semester exam. Admission shall normally be restricted to those with valid GATE score. However, this stipulation is relaxed in the case of sponsored candidates. In case seats remain vacant due to lack of candidates with valid GATE score, candidates from Kerala State without valid GATE score will be considered against such vacancies. Even if seats are still remaining vacant, candidates from other states will be considered for admission.

M.tech ECE (Communication Engineering)
  • Course Duration
    : 2years
  • Course Mode
    : full time
  • Total Seats
    :
  • Course Fees
    :
  • Eligibility

    The candidates shall be an Indian National. The candidates should have studied the Graduate course in an institution approved by the AICTE/ Deemed Universities. Candidates should have a minimum of 60% aggregate marks in the Engineering Degree examination. For SC/ST candidates a pass in the Engineering Degree course is sufficient. Candidates who have appeared for the final semester examination can also apply, provided he/she has passed all the subjects up to and including the 6th semester exam. Admission shall normally be restricted to those with valid GATE score. However, this stipulation is relaxed in the case of sponsored candidates. In case seats remain vacant due to lack of candidates with valid GATE score, candidates from Kerala State without valid GATE score will be considered against such vacancies. Even if seats are still remaining vacant, candidates from other states will be considered for admis

Campus

  • Labs

    Civil Workshop: Conducts Masonry works, Study of water supply and sanitary fittings and Study of surveying instruments.The workshop has a good collection of chains, tapes,compass ,plane table and minor instruments. Survey Laboratory: The survey lab has a good collection of Transit theodolites, electronic theodolite, dumpy levels, engineering chains, measuring tapes, plane table, prismatic compass and total station Material Testing Laboratory-I: The machineries of the lab includes Universal testing Machine, Impact testing machine, Brinell Hardness Tester, Spring testing machine, Torsion testing machine and other related accessories such as digital gauge, vernier calipers, Digital stop watches,Mechanical Extensometer with standard accessories, Double shear attachment for UTM etc. Hydraulics Laboratory: The machineries of the lab includes Centrifugal Pump , Pelton Wheel Turbine , Francis Turbine, Multistage Pump , Kaplan Turbine, Jet Pump , Hydraulic Ram , Venturi Meter, Orifice Meter , Rectangular Notch , Triangular Notch , Pipe Friction Apparatus , Orifice Tank, Time of Emptying Apparatus , Metacentric Height Apparatus Geotechnical Engineering Laboratory: This laboratory has equipment for testing the properties of soil both in field and lab. The test can be conducted to determine the index properties, particle size distribution, shear parameters and consolidation characteristics of soil. Material Testing Laboratory-II.: This lab is equipped with instruments for testing properties of building materials – Abrasion tests, Crushing,

  • Sports
    Basket Ball
    Cricket
    Football
  • Amenities
    Hostel
    Transport
    Library
    Wi-Fi
    Canteen
    Auditorium
    Seminar Hall
    Health Care
    Counselling Cell
    Sick Room
    Store
    Cafeteria
    Workshop
    Research Center
    Student Government

Placement

KMEA Engineering College has got a strong and full-fledged Career Guidance and Placement Unit (CGPU) with a full time Placement Officer. Regular placement oriented training programmes imparted from semester one onwards. All students registered with CGPU will be provided placement assistance, counseling for employment and self/Social entrepreneurship. The CGPU assures logistic support to the visiting companies at every stage of the placement process by making campus infrastructure available to them. The CGPU will act as an interface between the industry and the students, and will primarily enable the students to select from their career options. We shall facilitate the selection process of all the companies as per their requirement. The CGPU will liaison with corporate organizations to provide suitable jobs and internship for the candidates completing their studies from the campus. The CGPU also conducts seminars and workshops to enable the students of KMEA to become successful professionals. The goal of CGPU is to provide employment opportunities and world class training to students in leading organizations. The CGPU is well equipped with ample infrastructure in terms of Testing halls, Consultancy Hall for pre placement talk, Presentations et., All the reputed organization including MNCs comes to the college for campus recruitment. CGPU firmly believes in ‘Industry-Institute Interaction’. In order to accomplish ‘Industry-Institute Interaction’ it organized technical talks and national seminars to provide a platform for the budding engineers to interact with professionals from various industries. It encourages visits to the industries by the college students. It arranges for industrial problems to be worked on by students as part of their projects. It also takes suggestion from members of industry regarding designing/changing of curriculum. The CGPU functioning in the College is entrusted with the responsibility of Guiding students for placements in credible organization. Conducting seminars, group discussions, and mock interviews as a part of career guidance and personality development Coordinating the efforts of the students of the various departments in arranging industrial training for them Acting as an information center for students in job opportunities and competitive examinations like GATE, GRE,CAT and the like. Soft skill training, Placements assistance, Industrial Visits assistance, Projects and Internships assistance Regular placement oriented training programmes imparted from semester one onwards. Industry Institute Interactions (III) etc., The CGPU of the college is headed by a Placement Officer. The Cell has student representatives from all classes. The Student Coordinators interacts with the Placement Officer for the daily functioning of the Cell. The Cell has modern infrastructure facilities for receiving various companies in the campus and also for imparting training to the students. It has an air conditioned interview rooms to add to the other facilities available in the college such as conference room and a seminar hall with a capacity of 300. The College has an auditorium which can house 1500 persons at a time. Many companies have visited the campus during the academic years to select students of the college.

Scholarship

Scholarship Details not added yet

Video Gallery

No image is added in gallary yet

Notice Board

SL NO HEADLINE DESCRIPTION NOTIFIED DATE